i-tec Thunderbolt 3 Travel Dock Dual 4K Display + Power Delivery 60W

EU: 8595611703744
Thunderbolt 3/4
  • Compact docking station with extreme performance
  • Connect up to two 4K external monitors, or one at 8K/30Hz
  • DisplayPort and HDMI ports available
  • 1x USB 3.1 Gen 2 (10Gbps) and 1x USB 2.0 allow you to easily connect your USB devices and peripherals
  • Gigabit Ethernet RJ-45 provides reliable, robust and high-speed internet connectivity with support for 10/100/1000 Mbps speeds
  • Combined jack for audio and microphone
  • Note: Power supply not included. The dock can be used with the PSU supplied with the laptop, or a power supply can be purchased separately, P/N CHARGER-C112W/UK.
Product specifications


This docking station is designed to be used with any laptop, tablet or smartphone regardless of type, brand or operating system. All that is needed is for your laptop/tablet/phone to have a free Thunderbolt port.


Connect this docking station via a Thunderbolt 3 interface and gain access to the fastest data transfer available today. It is 8x faster than the standard USB port. With this speed, you can, for instance, back up 250 GB of data in less than a minute, or copy a film in Blu-Ray quality in under two seconds!


Do you enjoy detailed graphics with high resolution? If so, then this station can allow you to connect to one LCD monitor with up to 8K resolution! And of course, you can enjoy truly smooth video thanks to high refresh rate of 60 Hz.


Printer? Keyboard? Mouse? External hard drive or flash drive? Charging cable for your phone? You can connect all your devices to the docking station quickly and easily. In addition, you can connect to the Internet thanks a LAN port, eliminating any worries with variable speed and quality of Wi-Fi networks.


The Thunderbolt 3 port has so many tricks up its sleeve! Provided your laptop or tablet supports power delivery through this port, you gain the ability to connect all you need (data transfer, Internet, video and power supply) using a single cable.


Are you using Windows? Do you not make regular backups of your documents, pictures or videos? Install our free i-tec Docker Pro add-on ( and you can start backing up your data immediately and, more importantly, easily. Connect any hard drive or flash drive to your docking station and the rest is a matter of a few mouse clicks.



  • 1x integrated Thunderbolt 3 cable for connecting to a device (18 cm)
  • Docking station technology: Thunderbolt™ 3
  • Power Delivery: 60W
  • Video ports:
    • 1x Display Port
    • 1x HDMI
  • Resolution:
    • DP 1.2 HBR2:
      • 1 monitor – 1x DP → up to 4K/60 Hz
      • 1 monitor – 1x HDMI → up to 4K/60 Hz
      • 2 monitors – 1x HDMI + 1x DP → up to 2x 4K/60
  • DP 1.4 HBR3:
      • 1 monitor – 1x DP → up to 8K/30 Hz*
      • 1 monitor – 1x HDMI → up to 4K/60 Hz
      • 2 monitors – 1x HDMI + 1x DP → up to 2x 4K/60 Hz
  • 1x USB-C PD port (power delivery only)
  • 1x USB 3.1 Gen 2 port (10 Gbps)
  • 1x USB 2.0 port
  • 1x Ethernet GLAN RJ-45 port (Realtek RTL8153)
  • 1x 3.5 mm combo audio jack
  • Integrated USB-C cable (18 cm)
  • OS: Windows 10/11, macOS X (Sierra and later), Linux with latest updates
  • Product dimensions: 100 x 100 x 28 mm
  • Product weight: 210 g
  • Package dimensions: 133 x 165 x 38 mm
  • Package weight: 300 g


*8K resolution must be supported by the connected laptop or tablet.



Hardware requirements:

  • Device with a Thunderbolt3 port
  • USB-C Power adapter (at least 45W)

Requirements for Power Delivery feature:

  • device with a free Thunderbolt 3 port with support for Power Delivery technology

Requirements for video output:

  • device with a free Thunderbolt 3 port

Operating system:

  • Windows 10/11, macOS X (Sierra and later), Linux with latest updates


Package contents

  • Product
  • Instruction manual


Host OutputDSC StatusSingle Video OutputDual Video Output
Thunderbolt with DP 1.4

(Nvidia/AMD dGPU)

Up to 8K (7680 x 4320) @ 30HzUp to 4K (3840 x 2160) @ 60Hz
Thunderbolt with DP 1.4

(Nvidia/AMD dGPU or Intel iGPU 11th.gen or higher)

×Up to 8K (7680 x 4320) @ 30HzUp to 4K (3840 x 2160) @ 60Hz
Thunderbolt with DP 1.2

(Intel iGPU gen or AMD APU)

×Up to 5K (5120 x 2880) @60Hz (DP Only)Up to 4K (3840 x 2160) @ 60Hz


For functionality with Macbook Air M1, you must use a USB-C power adapter (not included) with at least 45W of power.

Docking station combining compact size with extreme performance supported by Thunderbolt 3 technology. Though the station is designed primarily for use on your travels due to its size and weight, its performance is not limited by any compromises! Video resolution of up to 8K, or 2x 4K, on both Windows 10 and macOS.

It is also the first docking station built on Thunderbolt 3 technology and designed primarily for travelling professionals. The station supports laptop charging via a USB-C (TB3) port with up to 60 W*. This will allow you to charge any laptop, even those that require a charging output of 100 W (e.g. a MacBook Pro 16“), though the charging may take a little longer.

Naturally, the station also features an integrated LAN port, USB ports (one of which offers bitrates of up to 10 Gbps) and support for audio output and microphone.

  • Connect up to two 4K external monitors or one monitor in 8K/30 Hz resolution
  • Power delivery: up to 60 W (power adapter not included)
  • DisplayPort and HDMI port available
  • 1x USB 3.1 Gen 2 (10 Gbps) and 1x USB 2.0 will allow you to easily connect your USB devices and peripherals
  • Gigabit Ethernet RJ-45 provides reliable, robust and high-speed Internet connection supporting 10/100/1000 Mbps speeds
  • Combined jack for audio and microphone
  • Supports Windows 10, macOS X
  • Note: Power supply not included. The dock can be used with the PSU supplied with the laptop, or a power supply can be purchased separately, P/N CHARGER-C112W/UK.

* The docking station must be used in combination with your USB-C power adapter (not included) in order to function properly.


Question: When I close the laptop lid, the laptop turns off. Is it possible to prevent it?


  • Windows has a special setting which controls what the laptop should do in case of closing the lid. This setting needs to be changed. Right-click the Start button and select Power options. From the options on the right, select Other power settings. A new window opens, and here from the left menu, select Choose what closing the lid does / When I Close the Lid and select Do nothing.
  • In macOS there are 4 conditions to be met to avoid turning off the MacBook. The MacBook needs to be connected to the power supply, an external keyboard, mouse, and monitor must be connected. Then you can close the MacBook lid and work with an external monitor only.



Question: I cannot set a 4K 60Hz resolution on the monitor.

Answer: First, please make sure that both the docking station / video adapter and the monitor can handle this resolution. Also, make sure that:

  • In case of connecting via HDMI your HDMI cable supports 4K 60Hz. This is supported only by the HDMI cables version 2.0 and later. Some monitors / televisions may also have an option in the settings which needs to be turned on.
  • In case of connecting via DisplayPort your cable supports 4K 60Hz. This is supported only by the DP cables version 1.2 and later. Also, be sure that in the settings of your monitor is selected the setting DP 1.2. In case you don’t know where to find it please refer to the manual for your monitor.

Question: Can the monitor connected via the docking station use the graphics technology from nVidia/AMD/Intel? E.g. G-sync, or FreeSync.

Answer: The docking station cannot use the graphics technologies from nVidia/AMD/Intel.



Question: Is it possible to set the frame rate to 120 Hz (144 Hz etc.) with the docking station / video adapter?

Answer: This is not possible. The docking station can handle maximum 60 Hz.



Question: Is it possible to connect a touchscreen monitor?

Answer: This is possible, but in this case i-tec Technologies cannot provide technical support because it is the technology of the monitor manufacturer.



Question: The image on the connected monitor flickers.

Answer: Please try a better HDMI/DisplayPort cable, this can solve your problem.


Question: Can I use a reduction to convert the signal from DVI/HDMI to DisplayPort?

Answer: Signal conversion from HDMI to DisplayPort is possible, but only in case of using the active (powered) adapter.  In any case, a passive (non-powered) cable/adapter cannot be used. The passive cables/adapters can only convert the DisplayPort signal to HDMI.

Question: The USB/Thunderbolt 3 cable is too short for my needs. Can I use a longer third-party cable?

Answer: Yes, it is possible. Please see the table below. Here you can see maximum cable lengths according to USB/Thunderbolt 3 specifications. Longer cables may not work properly.

Also, for USB-C and Thunderbolt 3 cables, you need to make sure they support DisplayPort Alt Mode (UBS-C only) and Power Delivery (USB-C and Thunderbolt 3) profiles. In case the docking station need it for its operation.

In case you are not sure, you can contact our technical support:


Cable typeMaximum cable length according the specifications
USB 3.02 m
USB-C1 m
Thunderbolt 3 – passive cable – maximum rate 40 Gbps0.75 m
Thunderbolt 3 – passive cable – maximum rate 20 Gbps2 m
Thunderbolt 3 – active cable – maximum rate 40 Gbps, not compatible with USB-C2 m


Question: I have attached speakers/headphones in the docking station’s audio connector, but they do not play any sound.

Answer: Right click the Start button and select an option Settings. Here select System and from the menu on the left select Sound and change here the Output device.



Question: I use a docking station in the office/business, and if I plug the Ethernet cable into the docking station, I can’t connect to the internet/local area network. But when I plug this cable into the LAN connector in the laptop, everything works properly.

Answer: In some cases, the businesses limit the LAN/local network connection only to the network elements with a known MAC address (each LAN connector has its own MAC address).

This can be bypassed either by manually changing the MAC address of the LAN connector in the docking station, or by using our i-tec Docker Pro software (for Windows) which clones the MAC address from your laptop to the docking station. The i-tec Docker Pro is free and you can download it from our website.

Question: I have a laptop with a Thunderbolt 3 or USB-C port, but the laptop does not charge anyway.

Answer: According to the Thunderbolt 3/USB-C specifications, the laptop powering is only optional. Not all laptops allow this option, especially the laptops with a power supply of over 100 W. Also, some manufacturers restrict/block charging from docking stations/adapters which are not produced by given manufacturer. If you are not sure whether your USB-C port meets these requirements, please contact your device manufacturer or our technical support:

Question: The docking station/graphics adapter will not connect at all and nothing works.
Answer: Please verify that your docking station is connected to the Thunderbolt3 port.

You can easily recognize this port by the lightning symbol .


Question: I have a laptop with a USB-C/Thunderbolt3 port, but the laptop does not charge anyway.
Answer: According to the USB-C/Thunderbolt 3 specifications, the laptop powering is only optional.
Not all laptops allow this option, especially the laptops supplied with a power supply which allows to charge your notebook with more than 100 W.

Question The external monitor will not wake up after waking up my laptop.
Answer Try changing the monitor’s input setting from AUTO to a fixed monitor input.
If, after a long time, the automatic search for the active port does not find any input,
then the monitor may sleep so that it fails to respond to the signal from the docking station port.

Question: Does this docking station/video adapter support an audio signal transfer over HDMI or DP?
Answer: Yes, if your monitor (projector) has integrated speakers, it is possible to transfer the audio signals via HDMI or DP cable. In your OS settings, however, you must change your default audio playback device.

Question: I connected a standard analogue microphone to the docking station’s combined audio port, but the microphone does not work. Why?
Answer: The combined (TRRS) audio port is not compatible with the standard analogue microphones.

Question: In my TB3 docking station is working only one video output. Where can be a problem?
Answer: Some manufacturers use a limited power Thunderbolt3 port on selected models of their Laptops / tablets (like Huawei Matebook X Pro, ACER Aspire R13 or Asus ROG GL502VM).  Specifically, it concerns a reduced total rate of 20 Gbps and a maximum of 1 video output support (whereas Thunderbolt3 industry standard is a rate of 40 Gbps and a support of 2 external monitors).

Therefore, an output to a single monitor is not a docking station failure, it is an insufficient (limited) TB3 port performance in your laptop or tablet (the problem is in the TB3 port hardware and can’t be remedied).

Before purchasing any Thunderbolt3 accessories, we recommend to check the TB3 port parameters of your laptop or tablet.

Question: My MacBook was shipped with an 87 W charging adapter. Will 60 W Power Delivery charge my MacBook?
Answer: Yes, it will just charge slightly slower.

Question: Only video outputs are working when my docking station is connected to my laptop.
Nothing else works. Why?
Answer: In the case of Thunderbolt docking stations and Windows system, it is first necessary to enable the docking station in the Thunderbolt device manager. You will find this manager next to the clock as a small flash icon.

Question: On my MacBook 13” / 15″ 2016 and later, my WiFi or Bluetooth stops working, or the USB 3.0 devices connected to the docking station disconnect. Where is the problem?
Answer: This problem is caused by interference in the 2.4 GHz band. A possible solution is that you connect the docking station to the Mac’s Thunderbolt 3 (USB-C) port on the left-hand side closest to you or that you use the ports on the right side. These ports are located farthest from the WiFi antenna. Another solution is using the 5 GHz band and placing the docking station as far as possible from your Mac monitor. For more information, please visit:

Question: The image on the screen connected via the docking station flashes.
Answer: If you experience this issue, you may only have an improper setting of the monitor refresh rate. If you have setting of 59 Hz, please set to 60 Hz.

Question: Is it possible to charge the HP laptops equipped with Thunderbolt 3 technology using this docking station?
Answer: Hewlett-Packard has implemented a proprietary technology in some models of its laptops which enables the charging only when using genuine HP stations. Please check the compatibility of your laptop with your reseller or contact the HP Technical Support.

Question: Everything works fine, but it only shows the speed of 10 Mbps. Where is the problem?
Answer: Verify all the cabling between the PC/laptop and the active element and push the RJ-45 connectors. Sometimes can also help replacing the Ethernet cable between the adapter and the active network element (hub, switch, router) with a certified one. A solution can also be setting a specific value (instead of Auto Negotiation) in the properties of the network adapters, Speed & Duplex option.


Question: May I use this device in Linux?
Response: Yes, the docking station supports Linux. Please make sure that your distribution is up to date. The docking station uses drivers, which are a part of the OS – the drivers should already be integrated in all current distributions. Unfortunately, because of the large volume of distributions it is not possible to test all of them.

Question: The docking station should manage up to 8K/30Hz but I am only able to set up 4K/60Hz on the monitor. What’s the problem?
Response:  In order to set up 8K/30Hz, the main graphic card (this is Intel on most laptops) must support DisplayPort 1.4 with DSC. Please make sure your laptop supports this.

Question: When I use a passive DisplayPort to HDMI adapter/cable, no image appears on the external monitor. What should I do?
Answer:  Unfortunately, such connection is not possible. Passive DisplayPort to HDMI conversion will not work. The DisplayPort on this product can only be used with DisplayPort cables.

Where to Buy

Online Resellers
Sales networks

Cenové srovnávače
Premium Reseller