E-Mail: service@i-tec.store
Telefon: 0351 89 88 187
i-tec USB-C Flat DP Adapter 4K/60 Hz
EU: C31FLATDP60HZ
EAN
EU: 8595611703034
- Flexible USB-C video adapter
- Adapter supports 1x DisplayPort resolution up to 4K/60 Hz
- Can connect to all USB-C ports: USB-C, Thunderbolt 3/4
- Adapter is compatible with all major operating systems
- No installation required for connection (Plug & Play)
PN: C31FLATDP60HZ - i-tec USB-C Flat DP Adapter 4K/60 Hz |
Select your notebook
Specifications
- 1x integrated USB-C cable for connecting to the host device (11,5cm)
- Graphic adapter technology: USB-C
- Video port:
- 1x Display Port (DP++ support)
- Supported Resolutions:
- 1 monitor – 1x Display Port → up to 4K/60 Hz
- 1 monitor – 1x DisplayPort → up to QHD/144Hz
- Compatible with G-Sync / Freesync, HDR 400 – 1000
- OS: Windows 10/11, macOS X, Android, Chrome OS Google with the latest updates
- Product dimensions: 135 x 20 x 12 mm
- Product weight: 16 g
- Package dimensions: 154 x 100 x 20 mm
- Package weight: 28 g
SYSTEM REQUIREMENTS
Hardware Requirements:
- Device with an available USB-C or Thunderbolt™3 port
Video output requirements:
- Device with an available USB-C port with “DisplayPort Alternate Mode” support or with Thunderbolt™3 port
- To use refresh rates of 60 Hz and higher, a monitor that supports these refresh rates is required
- In order to use HDR and G-Sync/Freesync, these technologies must be supported by the monitor and the graphics card
Operating System:
- Windows 10/11, macOS X, Android, Chrome OS Google with the latest updates
Package contents
- Product
Resolution
Description
Expand your desktop to external Display Port monitor or connect projector or television with Display Port interface to your notebook, tablet or PC via new USB-C or Thunderbolt 3 connector. The adapter supports 4K Ultra HD video with resolution up to 3840 x 2160@60 Hz and stereo sound. This adapter is made of rugged rubber material that can withstand tough conditions. It is, therefore, an ideal companion for travelling or when working in the field.
Using is very simple, just plug the adapter into the USB-C or Thunderbolt 3 port on your computer, connect it with a display device via Display Port cable and you can immediately start using. Driver installation is automatic from the system.
Please make sure to check a compatibility of your device, whether it meets all the requirements for an operation of the specific i-tec product, especially video output (Display Port Alt mode). If your device would not be fully compatible, your new i-tec product may not operate correctly. You may find the specifications your device (i.e. USB port), in a user manual supplied with your notebook/tablet/smartphone, or – alternatively – via customer service provided by a manufacturer of your device. If still uncertain, however, contact our service at support@itecproduct.com.
FAQ
Question: When I close the laptop lid, the laptop turns off. Is it possible to prevent it?
Answer:
- Windows has a special setting which controls what the laptop should do in case of closing the lid. This setting needs to be changed. Right-click the Start button and select Power options. From the options on the right, select Other power settings. A new window opens, and here from the left menu, select Choose what closing the lid does / When I Close the Lid and select Do nothing.
- In macOS there are 4 conditions to be met to avoid turning off the MacBook. The MacBook needs to be connected to the power supply, an external keyboard, mouse, and monitor must be connected. Then you can close the MacBook lid and work with an external monitor only.
Question: I cannot set a 4K 60Hz resolution on the monitor.
Answer: First, please make sure that both the docking station / video adapter and the monitor can handle this resolution. Also, make sure that:
- In case of connecting via HDMI your HDMI cable supports 4K 60Hz. This is supported only by the HDMI cables version 2.0 and later. Some monitors / televisions may also have an option in the settings which needs to be turned on.
- In case of connecting via DisplayPort your cable supports 4K 60Hz. This is supported only by the DP cables version 1.2 and later. Also, be sure that in the settings of your monitor is selected the setting DP 1.2. In case you don’t know where to find it please refer to the manual for your monitor.
Question: Can the monitor connected via the docking station use the graphics technology from nVidia/AMD/Intel? E.g. G-sync, or FreeSync.
Answer: The docking station cannot use the graphics technologies from nVidia/AMD/Intel.
Question: Is it possible to set the frame rate to 120 Hz (144 Hz etc.) with the docking station / video adapter?
Answer: This is not possible. The docking station can handle maximum 60 Hz.
Question: Is it possible to connect a touchscreen monitor?
Answer: This is possible, but in this case i-tec Technologies cannot provide technical support because it is the technology of the monitor manufacturer.
Question The external monitor will not wake up after waking up my laptop.
Answer Try changing the monitor’s input setting from AUTO to a fixed monitor input.
If, after a long time, the automatic search for the active port does not find any input,
then the monitor may sleep so that it fails to respond to the signal from the docking station port.
Question: What are the requirements for the primary graphics cards for use with graphics chipsets in i-tec graphics adapters and docking stations?
Answer: The graphics chipsets in i-tec products are secondary (additional) graphics cards in a PC.
They need a primary graphic card installed for their functionality.
Note for Windows 10 and later: In these operating systems, the graphics driver only works depending on the primary graphics cards: Intel, NVidia, ATI/AMD, VIA. It can’t work with SiS or Matrox graphic cards.
Question: I have your device and the image transfer does not work.
Answer: Your device must meet system requirements, especially DP Alt. Mode support on the USB-C port. If you are not sure about DP Alt. Mode support on your device, please contact your device manufacturer or our technical support: support@itecproduct.com.
Question: The image on the screen connected via the docking station flashes.
Answer: If you experience this issue, you may only have an improper setting of the monitor refresh rate. If you have setting of 59 Hz, please set to 60 Hz.
Question: Can I use this docking station/video adapter also via the Thunderbolt3 port?
Answer: Yes, the USB-C docking station/graphics adapter can also be used via the Thunderbolt3 port.
Only the Power Delivery may not work, but it depends on the TB3 features of your laptop.
Question: May I use this device in Linux?
Response: Yes, the docking station supports Linux. Please make sure that your distribution is up to date. The docking station uses drivers, which are a part of the OS – the drivers should already be integrated in all current distributions. Unfortunately, because of the large volume of distributions it is not possible to test all of them.
Question: When I use a passive DisplayPort to HDMI adapter/cable, no image appears on the external monitor. What should I do?
Answer: Unfortunately, such connection is not possible. Passive DisplayPort to HDMI conversion will not work. The DisplayPort on this product can only be used with DisplayPort cables.
If you aren’t certain, please contact our technical support staff: support@itecproduct.com