E-Mail: service@i-tec.store
Telefon: 0351 89 88 187
i-tec Universal Charger USB-C PD 3.0 100 W
EU: CHARGER-C100W
UK: CHARGER-C100WUK
EAN
EU: 8595611706622
UK: 8595611706660
- Universal USB-C charger with a maximum power of 100 W
- Suitable for powering notebooks, tablets, smartphones, and other devices equipped with a USB-C charging port.
- The voltage is automatically adjusted according to the requirement of your device.
- Available voltages: 5 V / 9 V / 12 V / 15 V / 20 V
- Max current: 5A
- Damage- and overheat-resistant design
Specifications
- Universal 100 W USB-C power adapter for powering laptops, tablets, smartphones and other devices equipped with a USB-C charging port AC input voltage 100-240 V, 50-60 Hz, max.1.8 A
- Output power (max.): 100 W
- Efficiency: more than 89%
- USB-C output voltage: DC 5 V / 9 V / 12 V / 15 V / 20 V
- USB-C output current: max. 5A
- USB-C output power (max:) 100W
- Protection against overcurrent, overvoltage, short circuit and overheating.
- Operating temperature: 0 °C – 30 °C
- Relative humidity: 5% – 90%
- Product dimensions: 162 x 45 x 30 mm
- Product weight: 310 g
Package contents
- Product
- Manual
- Country-specific power cable (EU, UK or USA)
Resolution
Description
This 100W USB-C Universal Power Adapter is a great choice for powering any laptop or other USB-C equipped device that supports USB-C Power Delivery with a maximum of 100W.
The voltage is automatically adjusted according to the USB Power Delivery specification and individual profiles in the following steps: 5 V / 9 V / 12 V / 15 V / 20 V with a maximum of 5 A current draw.
The power adapter is lightweight and very portable; it is equipped with intelligent protection against overcurrent, overvoltage, short circuit and overheating.
Manuals
FAQ
Question: When I disconnect the USB-C Power Delivery adapter from the dock, the monitor reboots and the USB device disconnects and reconnects.
A: In this case, this is standard behavior as described in the USB-IF Power Delivery specifications. When the adapter is disconnected, the docking station must reverse its charging direction and take power from the laptop. The moment the current direction changes, all connected devices will reconnect.
Question: I have a laptop with a USB-C connector, but it does not charge when the adapter is plugged in.
A: Make sure your laptop’s USB-C connector supports the USB-C Power Delivery profile, which is needed to charge your laptop via the USB-C connector.
Question: My device connected via USB-A is not charging or is charging slowly
A: Make sure you are using the original USB cable that came with your device. Otherwise, the device may not charge or charge slower than its capabilities.
Q: Can this USB-C PD adapter be used to charge a device that requires less power than, for example, 65W.
A: Yes, this adapter can be used to charge all devices that have a USB-C port.
Question: I purchased your power supply/charger but it does not power the connected laptop.
A: In this case, make sure the LED on the power supply is on.
If it is, there may be an incompatibility between the power supply and the connected device.
Some laptops may not charge until they are turned off or require a USB-C PD adapter of 100W or higher to be connected.
Where to Buy
Sales networks
Distributors
Distributors
