E-Mail: service@i-tec.store
Telefon: 0351 89 88 187
i-tec Universal Charger USB-C PD 3.1 140 W
EU: CHARGER-C140W
UK: CHARGER-C140WUK
EAN
EU: 8595611707209
UK: 8595611707216
- Universal USB-C charger with a maximum power of 140 W
- Suitable for powering notebooks, tablets, smartphones, and other devices equipped with a USB-C charging port (140 W is available if it supports a USB-C PD 3.1 protocol, otherwise 100W will be provided).
- The voltage is automatically adjusted according to the requirement of your device.
- Available voltages: 5 V / 9 V / 12 V / 15 V / 20 V / 28 V
- Max current: 5A
- Damage- and overheat-resistant design
Specifications
- Universal 140 W USB-C power adapter for powering notebooks, tablets, smartphones and other devices equipped with a USB-C charging port
- Input voltage AC 100-240 V, 50-60 Hz, max. 1.8 A
- Output power (max.): 140 W (for devices supporting PD 3.1 protocol)
- Efficiency: more than 83 %
- USB-C output voltage: DC 5 V / 9 V / 12 V / 15 V / 20 V / 28 V
- USB-C output current: max. 5A
- USB-C Output power (max): 140W *
- Protection against current overload, overvoltage, short circuit and overheating.
- Operating temperature: 0 °C – 35 °C
- Relative humidity: 10 % – 100 %
- Product dimensions: 127 x 70,5 x 30 mm
- Product weight: 379 g
Hardware requirements:
- Device with a free USB-C, USB4, or Thunderbolt™ 3/4/5 port with Power Delivery support
* If your laptop or tablet supports the new and modern USB-C Power Delivery PD 3.1 charging protocol, the docking station will offer charging power up to 140W (if you have PD 3.0, the charging power will be 100W)
Package contents
- Product
- Manual
- Country specific power cable (EU or UK)
Resolution
Description
This universal USB-C power adapter with power of 140 W * is a great choice for powering any laptop or other device equipped with a USB-C connector that supports USB-C Power Delivery with a maximum power demand of 140 W *.
The voltage is set automatically according to the USB Power Delivery specification and individual profiles in following steps: 5 V / 9 V / 12 V / 15 V / 20 V / 28 V with max. 5 A current consumption.
The power adapter is lightweight and very portable; it is equipped with intelligent current overload, overvoltage, short circuit and overheating protection.
* If your notebook or tablet supports the new and modern USB-C Power Delivery PD 3.1 charging protocol, the charger will offer charging power up to 140W (if you have PD 3.0, the charging power will be 100W)
Manuals
FAQ
Question: When I disconnect the USB-C Power Delivery adapter from the dock, the monitor reboots and the USB device disconnects and reconnects.
A: In this case, this is standard behavior as described in the USB-IF Power Delivery specifications. When the adapter is disconnected, the docking station must reverse its charging direction and take power from the laptop. The moment the current direction changes, all connected devices will reconnect.
Question: I have a laptop with a USB-C connector, but it does not charge when the adapter is plugged in.
A: Make sure your laptop’s USB-C connector supports the USB-C Power Delivery profile, which is needed to charge your laptop via the USB-C connector.
If so, there may be incompatibility between the power supply and the connected device. ( In this case, please email us at support@itecproduct.com)
Q: Is it possible to charge devices that require less power than for example 65W via this USB-C PD adapter?
A: Yes, this adapter can be used to charge all devices that have a USB-C port and support power delivery profiles.
Question: My laptop charges at a maximum of 100W
A: If your laptop or tablet supports the new and advanced USB-C Power Delivery PD 3.1 charging protocol, the power supply will offer charging power up to 140W (if you have PD 3.0, the charging power will be up to 100W).
Where to Buy
Sales networks
Distributors
Distributors
