MENU

i-tec MySafe USB 3.0 / USB-C 3.1 Gen. 2, External case for 2x SATA M.2 drive, RAID 0/1/JBOD Support

camysafedualm2-8
PN: CAMYSAFEDUALM2
EAN: 8595611702440
Thunderbolt 3/4USB 3.0USB-C
Voorgestelde verkoopprijs
  • NL - EUR
  • BE - EUR
€24.00 EUR excl. BTW
€29.04 EUR incl. BTW
€24.00 EUR excl. BTW
€29.04 EUR incl. BTW
PN: CAMYSAFEDUALM2
EAN: 8595611702440
Thunderbolt 3/4USB 3.0USB-C
Voorgestelde verkoopprijs
  • NL - EUR
  • BE - EUR
€24.00 EUR excl. BTW
€29.04 EUR incl. BTW
€24.00 EUR excl. BTW
€29.04 EUR incl. BTW

i-tec MySafe USB-C/USB-A 2x M.2 SATA Drive presents an external frame for installation of maximum two M.2 B-Key SATA Based SSD disks; you can connect this frame to your PC, notebook, or tablet by means of USB-C, or USB 3.0 interface (the connecting cables USB-C – USB-C as well as USB-C – USB 3.0 included). The USB connections USB offers very fast and easy data transfer – up to 10 Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible with Thunderbolt 3. Rigid aluminium design provides an excellent heat removal as well as perfect protection for the M.2 disks.

One of the greatest advantages of this frame is the support of RAID, which will allow either to set high

Zie meer
Koop nu

Specificatie

  • External enclosure/docking station for 2 x M.2 SATA drive
  • Compatible with M.2 SATA drives only, 2230, 2242, 2260, 2280 sizes (M.2 NVMe drives not supported)
  • 1x USB-C port for connecting to the host device
  • Enclosure/Docking Station interface maximum transfer rate up to 10 Gbps (USB-C Gen. 2)
  • RAID levels 0, 1, JBOD
  • 1x Power input (DC 5V/2A)
  • On/Off switch
  • LED indicator
  • Cable USB-C (45cm)
  • Cable USB 3.0 to USB-C (45cm)
  • OS: Windows 7 / 8 / 8.1 /10/11, macOS X, Linux, Android, Chrome OS
  • Product dimensions: 125 x 78 x 20mm
  • Product weight: 165g
  • Package dimensions: 168 x 110 x 50mm
  • Package weight: 295g

 

SYSTEM REQUIREMENTS

Hardware Requirements:

  • Device with an available USB-A, USB-C or Thunderbolt™3 port

Operating System: 

  • Windows 7 / 8 / 8.1 /10/11, macOS X, Linux, Android, Chrome OS

Inhoud van de verpakking

  • Product
  • USB-C-kabel (45cm)
  • Kabel van USB 3.0 naar USB-C (45cm)
  • Schroevendraaier + Schroeven
  • Handleiding

Resolutie

Beschrijving

i-tec MySafe USB-C/USB-A 2x M.2 SATA Drive presents an external frame for installation of maximum two M.2 B-Key SATA Based SSD disks; you can connect this frame to your PC, notebook, or tablet by means of USB-C, or USB 3.0 interface (the connecting cables USB-C – USB-C as well as USB-C – USB 3.0 included). The USB connections USB offers very fast and easy data transfer – up to 10 Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible with Thunderbolt 3. Rigid aluminium design provides an excellent heat removal as well as perfect protection for the M.2 disks.

One of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of two hard disks. The following RAID possibilities (if two hard disks are used) are available:

  • RAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks).
  • RAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost).
  • JBOD/Standalone: within the system, the frame is seen as two standalone ones.
  • JBOD/Spanning: within the system, the frame is seen as only one hard disk (with the capacity equal sum of capacities of both hard disks).

M.2 installation is very simple, it takes you just few minutes.

In case of problems with the installation, technical difficulties or incorrect function of the equipment, check first for the possible solution in the FAQ tab.

Long product description: i-tec MySafe USB 3.0 / USB-C 3.1 Gen. 2, External case for 2x SATA M.2 drive, RAID 0/1/JBOD Support, USB-C 3.1 Gen. 2 interface, Data transfer rate up to 10 Gbps (USB-C) or 5Gbps (USB 3.0), Aluminium housing, Thunderbolt 3 compatible

FAQ

Vraag: Het frame wordt niet gedetecteerd in het besturingssysteem.

Antwoord: Probeer het apparaat aan te sluiten op een andere USB-/Thunderbolt-poort (volgens het frametype)

 

Vraag: Is HDD niet zichtbaar in het systeem?
Antwoord: Zorg ervoor dat de HDD is geformatteerd. Vooral bij geheel nieuwe schijven. Dit kunt u controleren met het schijvenfbeheer in het apparatenbeheer. Daar zult de HDD ook formatteren. 

Waarschuwing! De formatteringsfunctie verwijdert altijd de gegevens. Maak daarom een back-up van uw gegevens, voordat u de formattering uitvoert.

 

Vraag: In dit frame kan geen M.2-schijf geplaatst (gebruikt) worden.

Antwoord: Dit frame is alleen bestemd voor de SATA M.2-schijven.

Waar te kopen

U bent een eind-klant
Verkoopnetwerken

U bent een reseller
Distributeurs
Premium Reseller